 |
Binders |
Coinscrew
Ring |
All types of special and one off applications. |
|
Binding |
Account Book
Case
Perfect
Plastic Comb
Reports/Theses
Wiro
|
Cold PVA or hot melt app.
Combs may be silkscreened on spine 5mm to 52mm capacity.
To university specs.
5mm to 25mm diameters, up to 500mm length books & calendars. |
|
Collating |
|
Four types of machines: sheets or sections 152 x 95mm to SRA2. |
|
Creasing |
|
Vertical bending & rotary machines. |
|
Drilling |
|
Three table shift, one auto multi-head, 1/8" to 1/2" diameter drills.
Attachments for filo-fax. |
|
Eyeletting |
|
.02 - 5/32" diameter hole. E40 - 3/16" diameter hole up to E56 - 5/16" hole. |
|
Folding |
Conventional
Gate
Miniature
|
100x145mm to 780 x 1200 mm all buckle machines; up to 6 concertina folds.
Double gate folds etc.
Sheet sizes 50 x 70mm to 350 x 500mm; six parallel folds, four cross folds. |
|
Gold Blocking |
|
Maximum blocking area 380 x 305mm, overall size up to SRA2. |
|
Guillotining |
|
Programmatic guillotines up to 115cm. |
|
Gumming |
Stencil |
Minimum 320 x 225mm, maximum 640 x 450mm in any pattern on sheet. |
|
Indexing |
|
Books are indexed as final operation after trimming, square cut or thumb hole. |
|
Laminating |
|
With 12.5 micron OPP film up to SRA1. |
|
Loose Leaf Piercing |
|
30+ tools available including most multi-hole system punchings.
Round cornering & angle cutting also available.
Hand fed or auto feed machines.
|
|
Mounting |
|
Showcards etc. cut flush or turned over edges. |
|
Numbering |
Crash/
Hand/
Rotary
|
Max sheet size 710 x 710mm.
Min distances between numbers 58mm centres horizontally, 35mm vertically.
|
|
Perforating |
|
Up to 640mm width; normal, long slot or micro perforation for laser printers. |
|
Plastabbing |
|
Plastic reinforced tabbing; 1/4", 3/8", 1/2", 5/8" & 3/4" width profiled tab cutters.
17 different colours of Mylar®.
SAMPLES AVAILABLE ON REQUEST.
|
|
Punching |
|
Ram-punching and Platen machines.
Over 200 circular cutters & 500 other shapes in stock.
Various aperture cutters also available.
|
|
Reinforcing |
|
9/16" or 3/4" pressure sensitive or heat activated Mylar® strip.
Min length 203mm, max 635mm.
|
|
Round Cornering |
|
1/8", 1/4", 3/8", 1/2" and 3/4" radius tools; also 45° angle cutting. |
|
Ruling |
|
1016 x 1016mm four colour disc ruling. |
|
Tabbing |
|
1/4", 3/8", 1/2", 5/8" and 3/4" width profiled tab cutters. |
|
Wire Stitching |
|
Eight station Macey gather-stitch-trim line plus cover feeder with 4th and 5th knife for two up work.
Min untrimmed size 147 x 90mm, max 520 x 323mm, binding edge first.
Min trimmed size one up 147 x 76mm. If printed to stitch, two up, with 6mm centre trim; minimum untrimmed size can be reduced to 100 x 76mm but with one stitch only.
Heavy duty stitching & side stabbing up to 25mm clenched/44mm stabbed both sides. |
